| « | July 2025 | » | | 日 | 一 | 二 | 三 | 四 | 五 | 六 | | | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | 19 | 20 | 21 | 22 | 23 | 24 | 25 | 26 | 27 | 28 | 29 | 30 | 31 | | | |
|
|
 [通信技术]smart card 7 |
gun 发表于 2005/1/14 17:31:49 |
|
Transmission Protocol Data Units (TPDUs): these protocols are used for the transmission of APDUs and the data structure that is exchanged by the host and a card suing the transport protocol are called as TPDUs.
Mainly two types of protocols are in common use for this purpose:
T = 0: the smallest unit processed and transmitted by the protocol is single byte, in other words it is byte oriented.
T = 1: this consists of sequence of bytes, in other words it is block oriented.
ATR
ATR is used for conveying parameters that are required by the card to establish a data communication pathway. This message is conveyed as soon as the power in the smart card is set to on and stands for answer to reset (ATR).
It is usually up to 33 bytes, contains the transmission parameters such as T = 0 and T = 1, which are supported by the card. It also carries all the necessary information that is required to be known by the host such as:
Data transmission rate
Card hardware parameters
Chip serial number
Mask version number | |
|
|
|
|
| 公告 |
 公告无语 |
| 统计 |
blog名称:
日志总数:52
评论数量:44
留言数量:1
访问次数:225577
建立时间:2005年1月4日 | |
